Electromagnetic flowmeter can measure conductive liquid, and the liquid temperature vortex flowmeter has requested the manufacturer, must not exceed 160 degrees commonly used to measure, such as: domestic water, how much water vortex flowmeter, mud, lime to have a corrosive liquid, etc., can not be measured organic solution and oil. Due to the high electromagnetic flowmeter measurement accuracy, easy operation and long life vortex flowmeter, stable performance, so a wider application for measuring non-corrosive liquids, temperature below 80 degrees, the general rubber lining for corrosive media use F4 lining for different media use different liners and electrodes, in order to ensure long-term stability of electromagnetic flowmeters in food, medicine and other health sector, the process often the need for regular use of high temperature steam cleaned and disinfected, and the line includes a flow sensor including joints can not have the residual medium to prevent bacterial growth, and therefore the health sector coupled with the meter pipe must be in the form of quick connectors, clamp-type structure that is Faraday induction law (referred to EMF generated when the conductor through a magnetic field inside conductor) is the basis of the principle of electromagnetic flowmeter. This measuring principle can be applied to a conductive fluid vortex flowmeter, the fluid flows into the conduit a magnetic field perpendicular to the flow direction, the potential induced in the fluid can be generated using two measurement electrodes are arranged symmetrically. The signal voltage UE and the magnetic induction B, the electrode spacing D and the average fluid velocity V proportional. Since the magnetic induction B and the electrode spacing D is constant, so the signal voltage UE and the average flow velocity V is proportional. The equation used to calculate the volumetric flow rate indicates that the signal voltage UE is linearly proportional to the volume flow. Anhui Electric Group (Advisory) | | vortex flow meter provided by the Anhui Electric Group Co. induced signal voltage is converted in the converter indexing, analog and digital output signals vortex flowmeter sales. Anhui Electric Group Co., Ltd. (www.ahecable.com) is Chuzhou, bare wires and bare conductor products leader, over the years, the company is implementing the scientific management, innovation and development, the principle of honesty and trustworthiness, and satisfy customer needs. Anhui Electric Group leadership with the staff warmly welcome all inquiries negotiations to create Anhui Electric Group, a better future.