Installed base measured 3.1 opening weld pipe is larger than the base ￠ 51 tube gas meter company, the base ￠ 51 tube is inserted into the opening for the pipe at a depth of weld flat on both sides, as shown; 3.2 stainless steel flat welding electrode After welding the pipe flange to ensure Anhui gas flow parallel to the axis, 4. Installation 4.1 Cleaning the sensor mounting base of the test tube welding slag and burrs. 4.2 DN50 ball valve mounted on the mounting base, pay attention to the long cavity ball up, check the valve switch to normal. 4.3 clamping threaded mount kit to the valve gas meter selling price, loosen the screw and the compression nut, insert the sensor rod is inserted through the ball valve for the pipe. 4.4 Sensor insertion depth is extended outside the base 3mm, meet the requirements, tighten the positioning screw and clamping nut. Also note signs consistent with the fluid flow direction sensor. High pressure electromagnetic flowmeter technology parameters: Nominal diameter: DN25 ~ DN250mm · Nominal pressure: 6.3,10,16,25,32,40,70MPa · Accuracy: ± 0.5% of indicated value, optional display value ± 0.3 % or ± 0.2% · lining: Polyurethane, F4, F46 · electrode materials: molybdenum-containing stainless steel, Hastelloy B, Hastelloy C, titanium, tantalum, platinum Anhui gas meter, gas meter, Anhui Electric Group Anhui Electric Group Co., Ltd. to provide. Anhui Electric Group Co., Ltd. (www.ahecable.com) strong, credible, in Chuzhou bare wires and bare conductor products industry has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas Anhui Electric Group will lead into the brilliant and you work for a better future!