Works armored thermal resistance works: Face thermal resistance at a temperature effect sales, thermal resistance wire resistance change with changes in face thermal resistance parameters, display meter will indicate the resistance value of thermal resistance generated by the corresponding temperature value. ● The main technical indicators resistance thermal resistance temperature sensing element 100 ℃, the (R100) and its resistance at 0 ℃ R0 ratio of: (R100 / R0) indexing number Pt100: A grade R0 = 100 ± 0.06Ω B grade R0 = 100 ± 0.12Ω R0 / R100 = 1.3850 heat resistance should be avoided in the next place too close to the stove or body from heat, should be installed in the absence of shock or vibration small place, at the same time to facilitate the construction and maintenance. Installation location should be possible to maintain the vertical face thermal resistance of manufacturers, but there is a flow rate must be tilted when installed. Junction box should be below the hole. Armored thermal resistance thermal resistance should be required to install the wiring, the general three-wire system. Connecting wire insulation should be used (preferably screen open) wire, its cross-sectional area ≥1.0 mm, the resistance of the wire should show the registration provisions of the instrument face thermal resistance sales _ _ face thermal resistance from Anhui Anhui Electric Group Electric Group Co., Ltd. to provide. Anhui Electric Group Co., Ltd. (www.ahecable.com) strong, credible, in Chuzhou bare wires and bare conductor products industry has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead Anhui Electric Group and you hand into the brilliant, for a better future!