Explosion-proof electrical contacts YTXC-100/150-B used Ordering Information: 1, the instrument should be installed in the environment -20 ℃ ~ 40 ℃, relative humidity less than 80%, altitude lower than 2000m, installed in place by the resistance Remote pressure gauge selection, the monthly average temperature is not higher than + 30 ℃, due to changes in the price of resistance temperature of Remote pressure gauge, allowing the surface to produce Cream gauge resistance Remote pressure gauge quotes, measured medium temperature <70 ℃, (if used in high temperature steam and other media measurement, temperature should be used in explosion-proof electrical contacts). 2, the instrument must be mounted vertically, and strive to maintain the same level position with the measuring point, or should be included in the additional error caused by the level difference. 3, instrument electrical lines (see Figure 2), and carefully check the action on the test properly followed. 4, some of the general use of pressure gauge pressure cap 3/4. 5, when adjusting the meter setting (by adjusting the knob resistance Remote pressure gauge, the upper and lower limit pointer adjusted setpoint) should adjust the upper limit set value and then adjust the setting value. 6. Open the outlet box or the need to adjust to after power off when setpoint range. 7, measuring corrosive, crystallization and solidification of the medium, requires the use of acid-resistant, corrosion-proof electrical contacts or diaphragm, measuring small pressure (10Kpa ~ 60Kpa), with diaphragm-proof electrical contacts, there is vibration measurement occasions please use the magnetic-assisted electric contact pressure gauge or digital pressure gauge stainless steel explosion-proof electrical contacts Ambient temperature: -25-70 ℃ (within the shell filling) -40-70 ℃ (not filled within the enclosure) Temperature effects: not more than 0.4% / 10 ℃ (temperature deviation from 20 ± 5 ℃) Anti-vibration work environment: VH4 (inner shell filled) VH3 (not filled within the enclosure) resistance Remote pressure gauge manufacturers | Anhui Electric Group | resistance Remote pressure gauge provided by Anhui Electric Group Co., Ltd .. Anhui Electric Group Co., Ltd. (www.ahecable.com) is Chuzhou, bare wires and bare conductor products leader, over the years, the company is implementing the scientific management, innovation and development, the principle of honesty and trustworthiness, and satisfy customer needs. Anhui Electric Group leadership with the staff warmly welcome all inquiries negotiations to create Anhui Electric Group, a better future.